Phone: +375 (214) 55-72-10
E-mail: info@polymir.by
Font size: A A A A
Color: A A A A A
Images: On | Off
Main version
Main page - Products - Main feedstock

Main feedstock

Hydrocarbon feedstock

No. Feedstock Monitored parameters and measurement units Norm
1. Naphtha – steam cracking feedstock. Straight-run naphtha 1. Density at 20°С, g/cm3, not more 0,725
2. Fraction composition, °С:
– IBP, not lower 35
– 10% of the product is distilled at the temperature, not higher 75
– 50% of the product is distilled at the temperature, not higher 115
– 90% of the product is distilled at the temperature, not higher 150
– FBP, not higher 180
3. Hydrocarbon composition, %:
– mass fraction of aromatic hydrocarbons, not more 10,0
– mass fraction of naphthene hydrocarbons, not more 35,0
– mass fraction of paraffinic hydrocarbons, not less 55,0
– mass fraction of olefinic hydrocarbons, not more 2,0
4. Iodine number, g iodine per 100 g product, not more 2,0
5. Mass fraction of sulphur, %, not more 0,1
6. Water soluble alkali content none
7. Water and mechanical impurities content none
8. Mass concentration of actual gums, mg per 100 cm3 of product, not more 2
2. Broad fraction of light hydrocarbons 1. Mass fraction of components, %: Grade А Grade B
– total hydrocarbons С1–С2, not more 3 5
– propane, not less 15 –
– total hydrocarbons С4-С5, not less 45 40
– total hydrocarbons С6 and higher, not more 15 30
2. Mass fraction of hydrogen sulphide and mercaptan sulphur, %, not more 0,025 0,050
including: hydrogen sulphide, not more 0,003 0,003
3. Free water and alkali content none
4. Appearance colourless transparent liquid
3. Light hydrocarbons fraction 1. Mass fraction of components, %:
Grade А Grade B
– total hydrocarbons С1–С2, not more 3 5
– propane, not less 15 –
– total hydrocarbons С4-С5, not less 45 40
– total hydrocarbons С6 and higher, not more 2 7
2. Mass fraction of hydrogen sulphide and mercaptan sulphur, %, not more 0,025 0,050
including: hydrogen sulphide, not more 0,003 0,003
3. Free water and alkali content none
4. Appearance colourless transparent liquid
4. Normal butane fraction 1. Mass fraction of components, %: Highest А B V
– Normal butane, not less 98,6 97,5 94,0 88,0
– Propane, not more 0,3 0,5 1,0 1,0
– Total iso- and normal pentane and higher, not more 0,4 0,6 2,5 5,0
– Total butylenes, not more 0,5 1,0 1,0 2,0
– Isobutane, not more 0,9 1,5 4,0 н/н
2. Mass fraction of hydrogen sulphide and mercaptan sulphur, %, not more 0,005 0,005 0,01 0,01
3. Free water and alkali content none
5. Butane fraction 1. Mass fraction of components, %:
– normal butane, not less 80,0
– total hydrocarbons С1-С2, not more not normed
– propane, not more not normed
– total iso and normal pentane and higher, not more not normed
– total butylenes, not more not normed
– isobutane, not more not normed
2. Mass fraction of hydrogen sulphide and mercaptan sulphur, %, not more 0,05
including: hydrogen sulphide, not more 0,003
3. Content of free water and alkali none
6. Normal pentane fraction 1. Mass fraction of components, %: Grade А Grade B
– total hydrocarbons С1–С3, not more not normed
– normal pentane, not less 96,5 93,5
– total hydrocarbons С4, not more 0,2 1,0
– isopentane not normed
– total cyclopentanes and hydrocarbons  С6 and higher, not more 3,0 4,5
including total hydrocarbons С6 and higher, not more 1,5 2,0
– total unsaturated hydrocarbons, not more 0,3 0,5
2. Mass fraction of sulphuric compounds , %, not more 0,01 0,01
3. Alkali content none
4. Content of free water and mechanical impurities none
7. Propane-propylene fraction 1. Mass fraction of components, %:
– propylene, not less 75,0
– propane, not more 23,5
– total hydrocarbons С4, not more 1,5
– total hydrocarbons С2, not more 1,0
2. Water content none

 

Chemical Feedstock

No. Process feedstock and auxiliary materials Monitored parameters and measurement units Norm
1. 2-acrylamido-2-methylpropane sulfonic acid (AMPS)

 

 1. Appearance white colour irregular shape pellets
2. Mass fraction of unsaturated compounds calculated as AMPS, %, not less 97,0
3. Mass fraction of nonvolatile substances, %, not less 99
4. Mass fraction of water, %,  not more 0,30
5. Mass fraction of iron, %, not more 0,001
6. Chromaticity according to platinum-cobalt scale

(25% water solution), Hazen units, not more

 100
7. Acid number, mg КОН/g 272 – 282
8. Mass fraction of sulphates, %, not more 0,2
9. рН at storage, рН units 8 – 11
10. Opalescence none
11. Correspondence of the type of kinetic curves of polymerization of the tested workshop feedstock and the presence of a common range of their conversion confidence intervals at 200 min. complies

 
2. Azobisisobutyronitrile

(porofor 57, porofor ChHZ-57)

 1. Appearance white crystalline powder, slight lumping is possible
2. Mass fraction of water and volatile matter, %, not more 0,2
3. Mass fraction of substances insoluble in isopropyl alcohol, %, not more 0,2
4. The residue after screening on screen with mesh No. 2 none
5. Melting temperature, ºС within limits 100 – 103
6. Gas number, cm3/g, not less 140
3. Aluminium sulphate, technical, purified, second sort 1. Appearance Strips, bars, lumps of irregular shape without tendency to lumping, of different sizes with weight  not more than 10 kg, of white colour.

Shades of grey, blue or pink colour are allowed.
2. Mass fraction of aluminium oxide, %, not less 15
3. Mass fraction of free sulphuric acid  (Н2SO4), %,  not more 0,1
4. Mass fraction of iron calculated as iron oxide (III), %, not more 0,3
4. Ammonia liquid technical

Grade («А», «Аk», «B»)

  

1. Mass fraction of ammonia,  %, not less

 Grade А Grade Аk Grade B
99,9 99,6 99,6
2. Mass fraction of water (residue after evaporation), % – 0,2

–

0,4

 0,2

–

0,4
3. Mass fraction of water  (Fisher method), %,

not more

 0,1 – –
4. Mass concentration of iron, mg/dm3, not more 1 1 2
5. Mass fraction of nitrogen, %, not less – 82 82
6. Mass concentration of oil, mg/dm3, not more 2 2 8
5. Ammonium molybdate tetrahydrate, chemically pure 1. Appearance colourless or slightly coloured green or yellow crystals
2. Mass fraction of ammonium molybdate tetrahydrate

(NH4)6Mo7O24 x 4H2O, %

 99 – 101
3. Mass fraction of substances insoluble in water, %, not more 0,005
4. Mass fraction of chlorides, %, not more 0,0005
5. Mass fraction of iron, %, not more 0,001
6. Solubility of preparation in water at 50° С shall pass the test
6. Sulphuric anhydride liquid technical highest grade

 

 1. Mass fraction of water, %, not more 0,02
2. Mass fraction of nonvolatile residue, %, not more 0,01
7. Antistatic for acrylic fibre 1. Appearance transparent colourless or pale yellow viscous liquid

 
2. Solubility in water at temperature(20,0 – 25,0) ºС transparent solution without mechanical impurities
8.  

 

Technical acetone

 Norm for the grades
Highest sort 1st sort 2nd sort
1. Appearance colourless transparent liquid
2. Mass fraction of acetone, %,  not less 99,75 99,50 99,00
3. Density, ρ420, g/cm3 0,789-0,791 0,789-0,791 0,789-0,792
4. Mass fraction of water, %,  not more 0,2 0,5 0,8
5. Mass fraction of methyl alcohol, %, not more 0,05 0,05 not normed
6. Mass fraction of acids calculated as acetic acid, %, not more 0,001 0,002 0,003
7. Resistance to oxidation with potassium manganate, hr., not less 4 2 0,75
9. Pyrogenic silica – silicone dioxide

 

 Aerosil
A-175		 Aerosil
A-300		 Orisil
175		 Norm as per specification
1. Mass fraction of silicone dioxide calculated as oven-dry weight, %, not less 99,9 99,9 99,9 99,8
2. pH of suspension,  рН units 3,6-4,3 3,6-4,3 3,6-4,3 3,6-4,7
3. Mass fraction of moisture, %, not more 1,5 1,5 1,5 1,5
4. Mass fraction of loss at calcination, %, not more 1 1 1 1
5. Bulk density: – uncompacted 40-60 40-60 not more 50 40-80
                          – compacted 120-140 110-140 not less 110 105-140
10. Reagents for circulation water treatment: biocides, sediment inhibitors, corrosion inhibitors, scale inhibitors As per manufacturer specification  
11. Bismuth nitrate (III)

pentahydrate, analytically pure

 

 1. Mass fraction of Bismuth nitrate (III)

pentahydrate (Bi(NO3)3´5Н2О), %, not less

 99,5
2. Mass fraction of substances insoluble in nitric acid, %,

not more

 0,002
3. Mass fraction of chlorides (Cl), %, not more 0,001
4. Mass fraction of sulphates (SO4), %, not more 0,005
5. Mass fraction of iron (Fe), %, not more 0,001
6. Mass fraction of copper (Сu), %, not more 0,0005
7. Mass fraction of lead (Pb), %, not more 0,005
8. Mass fraction of magnesium (Mg), %, not more 0,0005
9. Mass fraction of calcium (Са), %, not more 0,0005
10. Mass fraction of sodium (Na), %, not more 0,0005
12. Bismuth metal, manufacturer qualitycertificate 1.  Mass fraction of bismuth, %, not less 99.99
2. Mass fraction of lead (Pb), %, not more 0,006
3. Mass fraction of zinc (Zn), %, not more 0,0005
4. Mass fraction  of  antimony (Sb)%, not more 0,0005
5. Mass fraction of copper (Cu), %, not more 0,001
6.  Mass fraction of silver (Ag), %, not more 0,004
7. Mass fraction of arsenic (As), %, not more 0,0003
8. Mass fraction of iron (Fe), %, not more 0,001
9. Mass fraction of cadmium (Cd), %, not more –
10. Mass fraction of cobalt (Co), %, not more –
11. Mass fraction of manganese (Mn), %, not more –
12. Total impurities, %, not more 0,01
12/1. Bismuth metal,

grade BiOO

 1. Mass fraction of bismuth, %, not less 99,98
2. Mass fraction of lead (Pb), %, not more 0,01
3. Mass fraction of zinc (Zn), %, not more 0,0005
4. Mass fraction  of  antimony (Sb)%, not more 0,00002
5. Mass fraction of copper (Cu), %, not more 0,0001
6. Mass fraction of silver (Ag), %, not more 0,00002
7. Mass fraction of arsenic (As), %, not more 0,00007
8. Mass fraction of iron (Fe), %, not more 0,001
9. Mass fraction of cadmium (Cd), %, not more 0,00005
10. Mass fraction of cobalt (Co), %, not more 0,00003
11. Mass fraction of manganese (Mn), %, not more 0,00001
12. Total impurities, %, not more 0,02
13. Hydrogen

peroxide

 1. Appearance colourless transparent liquid
2. Mass fraction of hydrogen peroxide, % 30 – 40
14. Leveling agent for dyeing of acrylic fibre 1. Appearance transparent colourless or pale yellow liquid
2. Hydrogen ion exponent of consumer leveling agent, pH units 7,0 – 9,0
3. Main constituent, % 50,0 – 52,0
4. Solubility of 10 % preparation in water at (15 – 25) °С soluble

(no residue, haze, gel)
15. Hydrazine hydrate technical 1. Appearance colourless transparent liquid
2. Mass fraction of hydrazine (N2H4),% 64,0 – 67,0
3. Mass fraction of ammonia, %, not more 0,06
16. Hydroquinone

(para-Dioxybenzene), 1sort

 1. Mass fraction of hydroquinone, % 99 – 101
2.  Mass fraction of iron (Fe), %, not more 0,010
3. Mass fraction of residue after calcination, %, not more 0,08
4. Melting temperature, °С 170 – 175
5.  Colour according to bichromatic scale, not more 20
17. Sodium hypochlorite,

Grade A, B

 1. Appearance Grade А Grade B
liquid of green-yellow colour, the colour may change to red-brown
2. Mass concentration of active chlorine, g/dm3,

not less

 190 170
3. Mass concentration of alkali calculated as NaOH, g/dm3 10 – 20 40 – 60
18. Dimethyl disulphide

 

 1. Appearance liquid from colourless to light yellow colour with specific smell
2. Mass fraction of dimethyl sulphide, %,

not less

 99
19. Di(3,5,5-trimethylhexanoyl)

peroxide

 

 1. Mass fraction of main constituent, % 74,0 – 76,0
2. Mass fraction of active oxygen, % 3,76 – 3,87
20. 2,2-Di(tert-butylperoxy) butane

 

 1. Mass fraction of main constituent, % 49,0 – 51,0
2. Mass fraction of active oxygen , %, not less 6,8
3. Mass fraction of tert-butyl hydroperoxide, %,  not more 0,3
21. Di-tert-butyl peroxide 1. Mass fraction of main constituent, % 99,0 – 100,0
2. Mass fraction of active oxygen , % 10,83 – 10,94
3. Mass fraction of tert-butyl  hydroxyperoxide, %, not more 0,1
22. tert-Butyl peroxy-2-ethylhexanoate 1. Mass fraction of main constituent, % 97,0 – 100,0
2. Mass fraction of active oxygen , % 7,17 – 7,40
3. Mass fraction of tert-Butyl peroxy-2-ethylhexanoate, % 0,0 – 0,05
23. N, N – dimethylformamide (ДМФ) 1. Appearance colourless transparent liquid
2. Colour according to iodine scale, units, not more 1
3. Density at 20 °С, g/cm3 0,940-0,950
4. Refraction index at 20 °С 1,429 – 1,431
5. Mass fraction of water, %, not more 0,2
6. Hydrogen ion exponent in water with mass fraction 20%, рН units 6,5 – 8,5
7. Mass fraction of dimethylamine, %, not more 0,01
8. Acidity, mg-eq/l, not more 1,0
9. Mass fraction of DMF, %, not less 99,7
24. Titanium dioxide, anatase form 1. Mass fraction of titanium dioxide, %, not less 98
2. Mass fraction of water, %, not more 0,5
3. Whiteness, standard units, not less 97
4. Mass fraction of particles with size to 1 µm, %, not less 50
25. Iron powder  PZhR 3.200.28 Appearance grey colour powder
26. Thermal polymerization inhibitor of column and compression equipment of the production unit As per manufacturer’s specification
27. Potassium nitrate, analytically pure 1. Mass fraction of potassium nitrate in dry preparation, %,
not less		 99,8
2. Mass fraction of chlorides (Сl), %, not more 0,0010
3. Mass fraction of loss at drying, %, not more 0,2
4. Hydrogen ion exponent of preparation solution with mass fraction 5 %, pH units 5,5 – 8,0
28. Calcium chloride technical, sort 1 1. Appearance powder or pellets of white colour
2. Mass fraction of calcium chloride, %, not less 90
3. Mass fraction of residue insoluble in water, %, not more 0,5
29. Hydrogenation catalyst МА-15. Palladium on active aluminum oxide  in  sulphurated form

 

 1. Mass fraction of catalyst components (calculated as calcinated at (850 ± 10 °С), %:

– palladium

  

 

0,45 – 0,50
– iron, not more 0,02
2. Mass fraction of loss at calcination

(850 ± 10) °С, %, not more

 9,0
3. Bulk density of catalyst (calcinated at (550 ± 5°С), g/cm3, not more 0,8
4. Diameter of pellets, mm 2,8 ± 0,2
30. Nitric acid, non concentrated, sort 1 1. Appearance transparent colourless or light yellowish liquid without mechanical impurities
2. Mass fraction of nitric acid (HNO3), %, not less 56,0
3. Mass fraction of calcinated residue, %, not more 0,02
4. Mass fraction of nitrogen oxides, %, not more 0,1
31. Orthophosphorous acid, thermic 1. Appearance transparent colourless liquid in 15 – 20 mm layer if looking opposite white background
2. Mass fraction of orthophosphorous acid (H3PO4), %, not less 73
3. Mass fraction of iron, %  not more 0,002
32. Orthophosphorous acid, pure 1. Appearance and colour shall pass the test
2. Mass fraction of orthophosphorous acid (H3PO4), %, not less 85
3. Mass fraction of chlorides, %, not more 0,0003
4. Mass fraction sulphates, %, not more 0,003
5. Mass fraction of iron, %, not more 0,002
6. Density at 20ºС, g/cm3, not less 1,69
33. Hydrochloric acid,

Grade Ch

 1. Mass fraction of hydrochloric acid (HCl),  % 35 – 38
2. Appearance colourless transparent liquid
34. Stearinic acid (approximate specification) 1. Appearance white flakes, poweder
2. Mechanical impurities none
3. Transparency at temperature 70 °С transparent
4. Solidification point, °С 53 – 59
5. Mass fraction of moisture, %, not more 0,2
6. Iodine number, gI2/100g, not more 6
7. Acid number, mg KOH/g 200 – 211
8. Saponification number, mg KOH/g 201 – 213
9. Fraction composition, %

С14, not more

С16

С18

C20, not more

  

4

25 – 50

40 – 62

3
35. Stearinic acid (approximate specification) 1. Appearance white flakes, poweder
2. Mechanical impurities none
3. Transparency at temperature 70 °С transparent
4. Solidification point, °С 55 – 58
5. Mass fraction of moisture, %, not more 0,2
6. Iodine number, gI2/100g, not more 6
7. Acid number, mg KOH/g 200 – 211
8. Saponification number, mg KOH/g 203 – 213
9. Fraction composition, %

С14, not more

С16

С18

C20, not more

  

2

42 – 50

43 – 57

1,5
36. Acetic acid, synthetic or recovered, Sort 1 Mass fraction of acetic acid, %, not less 99,5
37. Malic acid 1. Appearance white crystalline or pelletized powder
2. Mass fraction of malic acid, %, not less 99
3. Mass fraction of calcination residue (as sulphates), %,

not more

  

0,1
4. Mass fraction of substances insoluble in water, %, not more 0,05
38. Cationic dyes in liquid form

 

 1. Mass fraction of dye in relation to standard sample, %, in relation to optical density of standard sample 95 – 105
2. Deviation of maximum absorption wavelength from standard sample, nm,  not more ± 2
3. Hydrogen ion exponent (рН) of manufactured dyestuff, pH units complies with reference
4. Hydrogen ion exponent (рН) of dyestuff water solution when diluted 1:10, рН, not less 2,6
5. General colour difference related to reference  in colour coordinates  L*а*b* (1 % of dye on the fibre), ΔЕ, not more ± 1,5
6. Stability of dyestuff water extracts in concentrations  5 %, 10 %, 20 %, 80 % and 100 wt  % when storing within seven days at the room temperature stable (no gels, residue, crystals on the filter and dishware sides)
39. Iron (II) sulfate technical  

1.  Appearance

 1st sort 2nd sort
crystals, green-blue
2. Mass fraction of iron sulfates (II), %, not less 53 47
3. Mass fraction of free sulfuric acid, %, not more 0,3 1,0
4. Mass fraction of substances insoluble in water, %, not more 0,2 1,0
40. Simple polyether (antifoaming agent Laprol, grade  3003) 1. Mass fraction of water, %,  not more 0,10
2. Acid number, mg КОН/g, not more 0,05
41. Aviation oil,

grade  МС-20

 1. Kinematic viscosity at 100 °С, mm2/s, not less 20,5
2. Flash point in open crucible, °С, not lower 265
3. Content of mechanical impurities none
4. Water content none
42. White initiator oil Pionier М002

 

 1. Kinematic viscosity, mm2/s:

– at 40 °С,

– at 100 °С

  

13,0 – 17,0

3,0 – 4,0
2. Flash point in open crucible, °С, not lower 200
3. Water content none
4. Content of mechanical impurities none
43. White initiator oil Medinol

 

 

 1. Kinematic viscosity, mm2/s:

at 40 °С,

at 100 °С

  

12,0 – 17,0

2,0 – 4,0
2. Flash point in closed crucible, оС, not lower 150
3. Water content none
4. Content of mechanical impurities none
44. White initiator oil WOP 15

 

 1. Kinematic viscosity at 40 °С, mm2/s 12,0 – 17,5
2. Flash point in open crucible, оС, not lower 200
3. Water content none
4. Content of mechanical impurities none
45. White compressor oil

Kaydol

 

 1. Kinematic viscosity at 40 °С, mm2/s 63,0 – 70,0
2. Flash point in open crucible, °С, not lower 205
3.  Content of mechanical impurities none
4. Water content none
46. White compressor oil

Pionier М-1930

 

 1. Kinematic viscosity at 40 °С, mm2/s 63,0 – 80,0
2. Flash point in open crucible, °С,

not less

 230
3. Mass fraction of mechanical impurities, % none
4. Mass fraction of water, % none
47. Compressor oil ISO VG 100

(AGIP Radula 100)

 1. Kinematic viscosity at 40 °С, mm2/s 90 – 110
2. Kinematic viscosity at 100 °С, mm2/s 10,3 – 12,5
3. Flash point in open crucible, °С,  not less 245
4. Water content, % none
5. Content of mechanical impurities, % none
48. White compressor oil Orites 270 DS

 

 1. Kinematic viscosity at 40 °С, mm2/s 260 – 285
2. Kinematic viscosity at 100 °С, mm2/s 40 – 50
3. Flash point in open crucible, °С,  not less 230
4. Water content, %, not more 0,1
5. Content of mechanical impurities, % none
49. White compressor oil Plurasafe CL HC 1400 (Breox CL 1400) 1. Kinematic viscosity at 40 °С, mm2/s 257,0 – 287,0
2. Flash point in open crucible, °С,  not less 200
3. Water content, %, not more 0,25
4. Content of mechanical impurities, % none
50. Hydraulic oil

АМG-10

 1. Kinematic viscosity at 50 °С, mm2/s, not less 10
2. Flash point in open crucible, °С, not lower 93
3. Water content none
4. Mass fraction of mechanical impurities, %, not more 0,003
51. Hydraulic oil Shell Tellus S2 М46

 

 1. Kinematic viscosity at 40 °С, mm2/s 41,4 – 50,6
2. Flash point in open crucible, ºС,not lower 230
3. Water content none
4. Content of mechanical impurities none
52. Hydraulic oil Rando

HD-46

 

 1. Kinematic viscosity at 40 °С, mm2/s 41,4 – 50,6
2. Flash point in open crucible, °С, not lower 228
3. Water content none
4. Content of mechanical impurities none
53. Industrial oil, grade IGP-18 1. Kinematic viscosity at 40 °С, mm2/s 24 – 30
2. Flash point in open crucible, °С, not lower 180
3. Content of mechanical impurities none
4. Water content traces
54. Industrial oil, grade IGP -38 1. Kinematic viscosity at 40 °С, mm2/s 55 – 65
2. Flash point in open crucible, °С, not lower 210
3. Content of mechanical impurities none
4. Water content traces
55. Industrial oil, grade IGP-72 1. Kinematic viscosity at 40 °С, mm2/s 110 – 125
2. Flash point in open crucible, °С, not lower 220
3. Content of mechanical impurities none
4. Water content traces
56. Industrial oil, grade I-12А 1. Kinematic viscosity at 40 ºС, mm2/s 13 – 17
2. Flash point in open crucible, ºС, not lower 170
3. Water content traces
4. Content of mechanical impurities none
57. Industrial oil, grade I-20А 1. Kinematic viscosity at 40 °С, mm2/s 29 – 35
2. Flash point in open crucible, ºС, not lower 200
3. Water content traces
4. Content of mechanical impurities none
58. Industrial oil, grade I-30А 1. Kinematic viscosity at 40 °С, mm2/s 41 – 51
2. Flash point in open crucible, °С, not lower 210
3. Water content traces
4. Content of mechanical impurities none
59. Industrial oil, grade I-40А 1. Kinematic viscosity at 40°С, mm2/s 61 – 75
2. Flash point in open crucible, °С, not lower 220
3. Water content traces
4. Content of mechanical impurities none
60. Industrial oil, grade I-50А 1. Kinematic viscosity at 40 °С, mm2/s 90 – 110
2. Flash point in open crucible, °С, not lower 225
3. Water content traces
4. Content of mechanical impurities none
61. Doped gear oil

Series ITD-220

 1. Kinematic viscosity at 40 °С, mm2/s 198 – 242
2. Flash point in open crucible, °С, not lower 210
3. Mass fraction of water, % traces
4. Mass fraction of mechanical impurities, % none
62. Industrial oil

SHELL Omala F S2 G220

 1. Kinematic viscosity at 40 °С, mm2/s 198 – 242
2. Flash point in open crucible, °С, not lower 199
3. Water content none
4. Content of mechanical impurities none
63. Industrial oil SHELL Omala F S4 GX320

 

 1. Kinematic viscosity at 40 °С, mm2/s 288 – 352
2. Flash point in open crucible, °С, not lower 202
3. Water content none
4. Content of mechanical impurities none
64. Compressor oil
Grade ХА-30		 1. Kinematic viscosity at 20 °С, mm2/s 120 – 150
2. Kinematic viscosity at 50 °С, mm2/s 28  – 32
3. Content of mechanical impurities none
4. Water content none
5. Flash point in open crucible, °С, not lower 185
65. Compressor oil

Atlas Copco

Roto-H-Plus

 1. Kinematic viscosity at 40 °С, mm2/s, not more 32
2. Flash point in open crucible, ºС, not lower 205
3. Water content, % none
4. Content of mechanical impurities, % none
66. Compressor oil Kp-8С 1. Kinematic viscosity at 40 °С, mm2/s 41,4 – 50,6
2. Flash point in open crucible, °С, not lower 200
3. Water content none
4. Content of mechanical impurities none
67. Compressor oil KS-19 1. Kinematic viscosity at 100 °С, mm2/s 17 – 21
2. Flash point in open crucible, °С, not lower 245
3. Mass fraction of mechanical impurities, %, not more 0,007
4. Water content none
68. Compressor oil

ISO VG 150 (AGIP Acer 150)

 1. Kinematic viscosity at 40 °С, mm2/s 135 – 155
2. Kinematic viscosity at 100 °С, mm2/s 13 – 16
3. Flash point in open crucible, °С,not lower 255
4. Water content none
5. Content of mechanical impurities none
69. Compressor oil SK TURBINE OIL 32 1. Kinematic viscosity at 40 °С, mm2/s 28,8 – 35,2
2. Flash point in open crucible, оС,not lower 200
3. Mass fraction of mechanical impurities none
4. Mass fraction of water none
70. Compressor oil CENTAC TECHTROL GOLD III 1. Kinematic viscosity at 40 °С, mm2/s 120 – 146
2. Flash point in open crucible, °С, not less 200
3. Mass fraction of mechanical impurities none
4. Mass fraction of water none
71. Compressor oil

Mobil Gargoyle Arktic Oil 300

 

 1. Kinematic viscosity, mm2/s, at 40°С 61,2 – 74,8
2. Content of mechanical impurities, % none
3. Water content, % none
4. Flash point in open crucible, °С, not lower 200
72. Compressor oil Shell Refrigeration Oil S2 FR-A68 1. Kinematic viscosity at 40 °С, mm2/s 61 – 75
2. Flash point in open crucible, °С, not lower 232
3. Water content none
4. Content of mechanical impurities none
73. Engine oil

М-14В2

 1. Kinematic viscosity at 100 °С, mm2/s 13,5 – 14,5
2. Flash point in open crucible, °С,not lower 210
3. Mass fraction of water, % traces
4. Mass fraction of mechanical impurities, %, not more 0,02
74. Engine oil

For internal combustion engines GPA 1-4

 1. Total alkali number, mg КОН/g,  not less 3,8
2. Total acid number, mg KOH/g specify for information
3. Hydrogen ion exponent, units рН, not less 5,5
4. Kinematic viscosity at 100 °С, mm2/s 12 – 18
75. Heat transfer oil with aromatics АМТ-300 1. Kinematic viscosity at 100 °С, mm2/s, not more 5,9
2. Flash point in closed crucible, °С, not lower 175
3. Mass fraction of water, % traces
4. Mass fraction of mechanical impurities, % none
76. Transmission oil

ТМ-5-18

 1. Kinematic viscosity at 100 °С, mm2/s, not lower 17,5
2. Flash point in open crucible, °С, not lower 200
3. Mass fraction of water, %, traces
4. Mass fraction of mechanical impurities, % none
77. Transmission oil

TI 5-2

Manufactured by OJSC Naftan

 1. Kinematic viscosity at 100 ºС, mm2/s, not less 16,5
2. Flash point in open crucible, °С, not lower 180
3. Water content traces
4. Mass fraction of mechanical impurities, %,  not more 0,005
78. Oil turbine oil with additives

Grade Tp-22

 1. Kinematic viscosity at 40 °С, mm2/s 28,8 – 35,2
2. Flash point in open crucible, °С, not lower 186
3. Water content none
4. Content of mechanical impurities none
79. Turbine oil DTE OIL HEAVY MEDIUM “Mobil” 1. Kinematic viscosity at 40 °С, mm2/s 61,2 – 74,8
2. Flash point in open crucible, °С, not lower 200
3. Water content none
4. Content of mechanical impurities none
80. Transformer oil
Grade Т-1500У		 1. Kinematic viscosity at 40°С, mm2/s, not more 11,0
2. Flash point in closed crucible, °С, not lower 135
81. Cylinder oil

Ts-11

 1. Kinematic viscosity at 40 °С, mm2/s 9 – 13
2. Flash point in open crucible, °С, not lower 215
3. Mass fraction of water, % traces
4. Mass fraction of mechanical impurities, %, not more 0,007
82. Oil Shell Talpa G150

Or equivalent

Oil VM-5С

 1. Kinematic viscosity, mm2/s, at 50 °С 42
2. Flash point in open crucible, °С, not lower 250
3. Content of mechanical impurities none
4. Water content none
83. Technical methanol

Grade А, B

 

  

1. Appearance

 Grade А Grade В
colourless transparent liquid without insoluble impurities
2. Mass fraction of aldehydes and ketones  calculated as acetone, %, not more 0,003 0,008
3. Mass fraction of water, %, not more 0,05 0,08
4. Density at 20 °С, g/cm3 0,791 – 0,792
84. Molecular sieves 1. Bulk density, g/cm3, not less 0,7
2. Pellet size (diameter), mm 1,45 – 2,00
3. Mass fraction of loss at calcination, %, not more 5,0
85. Sodium nitrate, analytically pure

 

 1. Mass fraction of sodium nitrate (NaNO3) on dry basis, %, not less 99,8
2. Mass fraction of chlorides (Сl), %, not more 0,0020
3. Mass fraction of sulfates (SO4), %, not more 0,005
4. Mass fraction of loss at drying %, not more 1,0
5. Hydrogen ion exponent of preparation solution with 5 % mass fraction, pH units 5,0 – 7,5
6. Mass fraction of substances insoluble in water, %, not more 0,004
86. Caustic soda, purified

Grade А

 

 1. Appearance colourless transparent liquid
2. Mass fraction of caustic soda (NaOH), %, not less 46,0
3. Mass fraction of iron calculated as Fe2O3, %, not more 0,0007
4. Mass fraction of sodium chloride (NaCl), %, not more 0,007
5. Mass fraction of sodium carbonate (Na2CO3), %, not more 0,15
87. Caustic soda, technical

Grade RD, sort 1

or

caustic soda 50% RM

 

 1. Appearance colourless or coloured liquid

crystallized residue is permitted
2. Mass fraction of sodium hydroxide, %, not less 44,0
3. Mass fraction of sodium carbonate, %, not more 0,8
4. Mass fraction of sodium chloride, %, not more 3,8
5. Mass fraction of iron calculated as  Fe2O3, %, not more 0,02
88. Caustic soda, technical,

Grade TR

 1. Appearance white scales

light colour is possible
2. Mass fraction of sodium hydroxide, % not less 98,5
89. Sodium tripolyphosphate

Sort 1

 Mass fraction of total phosphorous pentoxide (Р2О5), %, not less 56,5
90. Optical bleacher for acrylic fibre

 

 1. Appearance transparent liquid of yellowish or yellow-brown colour
2. Mass fraction of bleacher in relation to standard sample, %, related to optical density of standard 95 – 105
3. Deviation of maximum absorption wave length from standard sample ± 2
4. Hydrogen ion exponent  of commercial bleach form, рН units 3,8 – 4,5
5. Stability of bleach water solutions in concentrations 0,5 %, 5 %, 10 %, 20 wt %  at storage within 7 days at room temperature stable (no gels, residues, crystals on the filter and dishware sides)
91. Paramethoxyphenol (monomethyl ether of hydroquinone) pure (PMF) 1. Crystallization temperature, °С, not less 54
2. Mass fraction of calcination residue, %, not more 0,1
92. Antifoaming agent Polydimethylsiloxane polymer

 

 1. Kinematic viscosity at 25 °С, mm2/s 332,5 – 367,5
2. Chromaticity according to АРНА, units Pt-Co scale, not more 35
3. Refraction index at 25 °С 1,4025 – 1,4045
93. Pigments 1. Hydrogen ion exponent, рН units 6,9 – 7,1
2. Solubility in water, %, not more 1,0
3. Mass fraction of water and volatile substances, %, not more 1,0
4. Residue after wet screening on screen with mesh № 0045, %, not more 0,03
94. Polyelectrolyte or polyacrylamide gel, technical Appearance pellets of white colour
95. Propylene 1. Volume fraction of propylene, %, not less 98,0
2. Volume fraction of hydrocarbons С2 + propane, %, not more 2,0
Including volume fraction of hydrocarbons  С2, %, not more 0,3
3. Volume fraction of propadiene + acetylene + methylacetylene, %, not more 0,003
4. Volume fraction of total hydrocarbons С4, %, not more 1,0
5. Volume fraction of diene hydrocarbons (propadiene and butadiene), %, not more 0,015
96. Propylene Highest sort First sort
1. Volume fraction of propylene, %, not less 99,8 99,0
2. Volume fraction of ethylene, %, not more 0,005 0,010
3. Volume fraction of acetylene and methylacetylene , %, not more 0,001 0,005
4. Volume fraction of hydrocarbons С4, %, not more 0,002 0,050
5. Volume fraction of diene hydrocarbons (propadiene and butadiene), %, not more 0,001 0,015
6. Volume fraction of ethane and propane, %, not more 0,2 0,7
7. Mass concentration of sulphur, mg/m3, not more 1 3
8. Mass fraction of water, %, not more 0,02 not normed
9. Free water content, not more

 

 none
97. Antioxidative additive  4-methyl-2,6-di-tertbutylphenol  technical,

(Agidol-1,

Grades A,B)

  

 

1. Appearance

 Grade А Grade B
white crystalline powder without impurities
2. End of melting temperature, °С, not lower 69,8 69,5
3. Temperature difference between beginning and end of melting, оС, not more 0,4 1,0
4. Crystallization temperature, °С, not lower 69,0
5. Ash %,not more 0,008 0,01
98. Technical silica gel,

Granulated, small pore

Grade KSMG, 1st sort

 1. Appearance glassy transparent or dull seeds of oval shape, spherical or irregular shape

colour from colourless to dark with black inclusions

 
2. Mass fraction of seeds, %, not less

at seed size  (2,8 – 7,0) mm

 94
3. Bulk density, g/dm3, not less 720
4. Mass fraction of loss at drying, %, not more 10
99. Technical silica gel,

pieces, small pore,

Grade KSMK

 1. Appearance glassy transparent or dull seeds of irregular shape
2. Mass fraction of seeds, %, not less

at seed size (2,8 – 7,0) mm

 92
3. Bulk density, g/dm3, not less 670
4. Mass fraction of loss at drying, %, not more 10
100. Technical silica gel

Grade HWS

 1. Appearance spherical seeds of oval shape from light brown to brown colour
2. Bulk density, kg/m3 600 – 900
3. Mass fraction of loss at drying, % not more 10
4. Mass fraction of seeds at seed size (2,8 – 5) mm, %, not less 90
101. Sodium silicate, soluble 1. Mass fraction of sodium dioxide, % 71,7 – 73,1
2. Mass fraction of aluminum oxide and iron oxide, %, not more 0,48
3. Mass fraction of sodium oxide, % 26,0 – 27,4
4. Silicate module 2,7 – 2,9
102. Graphite grease 1. Appearance homogeneous paste-like mass  from dark brown to black colour
2. Drop point, °С, not lower 77
3. Colloidal stability, %, of  not more 5
4. Mass fraction of water, %, not more 3
5. Penetration at 25 °С with mixing, mm 10-1, not less 250
6. Metal corrosion impact passes
103. Litol grease-24 1. Drop point, °С, not lower 185
2. Viscosity at 0 °С and average gradient of deformation speed 10 s-1, Pа·с, not more 280
3. Colloid stability, %, of released oil, not more 12
104. Solidol grease, fatty 1. Drop point, °С, not lower 78
2. Effective viscosity at 0 °С and average deformation speed gradient 10 s-1, Pа·s, not less 250
3. Colloidal stability, % 7         – 13
105. TSIATIM grease -203 1. Drop point, °С, not lower 160
2. Effective viscosity at minus 30 °С and average deformation  speed  gradient 10 s-1, Pа·s, not more 1000
3. Colloid stability, %, not more 10
106. Ion exchange resin АV-17-8 1. Appearance spherical seed from light yellow to dark brown colour
2. Particle size distribution:

– seed size, mm

  

0,315 – 1,25
– volume fraction of working fraction, %, not less 95
3. Mass fraction of moisture, % 35-50
4. Specific volume in ОН-form, mg3/m 3,0 ± 0,3
5. Total static exchange capacity, mg·mol/cm3, not less 1,15
107. Ion exchange resin KU-2-8 1. Appearance spherical seed from light yellow to dark brown colour
2. Particle size distribution:

– seed size, mm

  

0,315 – 1,25
– volume fraction of working fraction, %, not less 96
3. Mass fraction of moisture, % 35 – 50
4. Specific volume in  Н-form, cm3/g, not more 2,8
5. Total static exchange capacity, mg*mol/cm3, not less 1,8
108. Technical calcined soda, highest grade

 

 1. Appearance Grade А Grade B
pellets of white colour powder of white colour
2. Mass fraction of sodium carbonate Na2CO3, %, not less 99,4
3. Mass fraction of sulphates Na2SO4, %, not more 0,04
4. Mass fraction of iron calculated as Fe2O3, %, not more 0,003
5. Mass fraction of substances insoluble in water, %, not more 0,04 0,03
6. Mass fraction of loss at calcination (270-300°С), %, not more 0,7 0,5
7. Mass fraction of chlorides calculated as NaCl, %, not more 0,2 0,4
109. Sorbit (approximate specification) 1. Appearance transparent liquid without smell
2. рН (Hydrogen ion exponent) 50% solution 6 – 8
3. Refraction index at temperature 20 °С 1,455 – 1,461
4. Density at 25 °С, g/cm3 1,285 – 1,305
5. Mass fraction of water, % 28 – 30
6. Mass fraction of total sugars, %, not more 0,4
7. Mass fraction of reduced sugars, %, not more 0,1
8. Mass fraction of calcination residue (sulphates), %, not more 0,02
9. Mass fraction of iron, ppm, not more 5,0
110. Sorbit (approximate specification) 1. Appearance white crystals, powder
2. рН (Hydrogen ion exponent) 50% solution 3,5 – 7,0
3. Mass fraction of water, % 1,5
4. Mass fraction of total sugars, %, not more 0,5
5. Mass fraction of reduced sugars, %, not more 0,3
6. Mass fraction of calcination residue (sulphates), %, not more 0,1
7. Mass fraction of main constituent (sorbit), % 91,0 – 100,5
111. Sorbit (approximate specification) 1. Appearance white crystal pellets or powder
2. рН (Hydrogen ion exponent) 50% solution 5,0 – 7,0
3. Mass fraction of water, % 1,0
4. Mass fraction of total sugars, %, not more 0,5
5. Mass fraction of reduced sugars, %, not more 0,15
6. Mass fraction of calcination residue (sulphates), %, not more 0,1
112. Triphenyl phosphite 1. Mass fraction of main constituent, %, not less 98
2. Free acidity, mg-Eq/g, not more 0,06
3. Mass fraction of moisture, %, not more 0,4
4. Density at 25 °С, g/cm3 1,182 – 1,188
5. Refraction index at temperature 20 °С, not less 1,586
113. Activated charcoal grade AG-3 1. Fraction composition:

mass fraction of residue on screen with fabric

– № 36, %,  not more

– № 28, %,  not more

– № 15 %,  not less

– № 10, %,  not more

– on tray, %, not more

  

 

0,4

3,0

86,0

10,0

0,6
2. Resistance of pellets to attrition, %, not less 75
3. Mass fraction of moisture, %,  not more 5,0
4. Total pore volume by water, cm3/g, not less 0,8
5. Dynamic activity towards benzene, min, not less 40
114. Activated charcoal,

m.BAU-MF

 1. Appearance black colour seeds without mechanical impurities
2. Mass fraction of moisture, % not more 10
115. General purpose zeolites with binding agent

Grade NaА

 1. Bulk density, g/cm3, not less 0,65
2. Pellet size (diameter), mm 4,5 ± 0,5

3,6 ± 0,4

2,9 ± 0,3

2,4 ± 0,2

2,0 ± 0,2
3. Mass fraction of loss at calcination, %, not more 5
116. Synthetic zeolite KA-U 1. Bulk density, g/cm3, not less 0,72
2. Pellet size (diameter), mm 4,5  ± 0,5

2,9  ± 0,3

2,2  ± 0,2

1,6  ± 0,2
3. Mass fraction of loss at calcination, %, not more 4,3
117. Synthetic zeolite

Type КА-3М

 1. Bulk density, g/cm3, not less 0,7
2. Pellet size (diameter), mm 3,5 ± 0,5
3. Mass fraction of loss at calcination, %, not more 4,9
118. Ethylene oxide, technical

 

 1. Mass fraction of ethylene oxide, %, not less 99,9
2. Mass fraction of water, %, not more 0,01
3. Mass fraction of acids calculated as acetic acid, %, not more 0,002
4. Mass fraction of nonvolatile residue, %, not more 0,005
119. Ethylene glycol,1 grade 1. Appearance colourless transparent liquid
2. Refraction index at 20 °С 1,430 – 1,432
120. Ethyl mercaptan 1. Appearance colourless transparent liquid without residue

greenish shade is permitted
2. Mass fraction of ethyl mercaptan, %, not less 94