Font size: A A A A
Color: A A A A A
Images: On | Off
Main version
Main page - Products - Product Catalogue - Polyethylene products

Polyethylene products

POLYETHYLENE FILM (Technical Specifications GOST 10354), GradeN, Ns, STspf, V

POLYETHYLENE SHRINK FILM (Technical Specifications GOST 25951),Grades U, O, T, P

POLYETHYLENE GREENHOUSE FILM (Technical Specifications TU BY 300041455.036),GradeSS-3T, TSP, TSS-5

POLYETHYLENE FILM VILATERM (Technical Specifications TU RB 300041455.029)

POLYETHYLENE HOUSEHOLD BAGS (Technical Specifications TU BY 300042199.101), Type A, Type B

POLYETHYLENE HOUSEHOLD PIPES (Technical Specifications TU RB 300041455.039)

PIGMENT SUPER CONCENTRATES (Technical Specifications TU BY 300041455.020)

POLYETHYLENE WAX (Technical Specifications TU RB 300041455.024)


Polyethylene film
(Technical Specifications GOST 10354)

Grade N is intended for the manufacture of consumer goods, packaging and household products (including products for food contact use).

Grade Ns is intended for the manufacture of consumer goods, packaging and household products (excluding products for food contact use).

Grade STspf is intended for use in agriculture as a translucent weather-resistant coating for agricultural structures (greenhouses, grow tunnels, etc.) and other use cases.

Grade V is intended for use in construction of meliorative and water-management facilities as impervious screen.

Parameter Norm for the grade, highest quality
N Ns STspf V
Appearance Film should not have cracks, pressed-in creases, breaks and holes
* Nominal film thickness, mm 0,030-0,500 0,030-0,400 0,200-0,400
Maximum deviation from the nominal film thickness, % ± 20
Film width, mm, within the range Up to 6000 3000-6000
Maximum deviation from the nominal film width, % ± 2
*Tensile strength, MPa, not less:

– longitudinally

– transversally

 

14,7

12,7-13,7

 

14,7

12,7-137

 

14,7

13,7

 

14,7

13,7

*Relative elongation, %, not less:

– longitudinally

– transversally

 

300-330

350-400

 

300-330

350-400

 

300-350

400-440

 

450

450

Scent and smack of aqueous extracts, score, not higher 1
Formaldehyde concentration in aqueous extract, mg/l, not more 0,1
Color and transparency of distilled water after film soaking Color and transparency of distilled water shall not be changed

* –  values of parameters depend on the film thickness.

Notice: Other nominal thicknesses of the film may be produced upon request

 

Polyethylene shrink film
(Technical Specifications GOST 25951),
Grades U, O, T, P

Polyethylene shrink film is intended for packaging of piece-products, including consumer packaging, multiple-unit packaging and packaging of cargoes.

Polyethylene shrink film of U, O, T and P grades is approved for food contact applications.

Technical characteristics

Parameter Norm for the grade
U O T P
* Nominal film thickness, mm 0,03- 0,07 0,03-0,10 0,07-0,10 0,08-0,20
Maximum deviation from the nominal film thickness: ±20 ±20 ±20 ±15,*

±20 *

Nominal film width in a roll, mm
sleeve from 800 to 1500 inc.

over 1500 to 2000 inc.

from800 to 1500 inc.

over 1500 to 2000 inc.

over 2000 to 2700 inc.

from800 to 1500 inc. over 1500 to 2000 inc.

over 2000 to 2700 inc.

semi-sleeve up to 500

over 500 to 800 inc.

over 800 to 1500 inc.

over 1500 to 2000 inc.

up to 500

over 500 to 800 inc.

over 800 to 1500 inc.

over 1500 to 2000 inc.

over 2000 to 2700 inc.

up to 500

over 500 to 800 inc.

over 800 to 1500 inc.

over 500 to 800 inc.

over 800 to 1500 inc.

over 1500 to 2000 inc.

over 2000 to 2700 inc.

fabric up to 500

over 500 to 800 inc.

over 800 to 1500 inc.

over 1500 to 2000 inc.

up to 500

over 500 to 800 inc.

over 800 to 1500 inc.

over 1500 to 2000 inc.

over 2000 to 2400 inc.

up to 500

over 500 to 800 inc.

over 800 to 1500 inc.

over 1500 to 2000 inc.

over 2000 to 2400 inc.

sleeve with folding from700 to 1410 inc.

over 1410 to 1800 inc.

Maximum deviation from the nominal film width, mm
sleeve ± (15-20) ** ± (15-40) ** ± 15 ± (20-40) **
semi-sleeve ± (5-20) ** ± (5-40) ** ± (5-15) ** ± (10-40) **
fabric ± (5-20) ** ± (5-30) ** ± (5-15) ** ± (20-30) **
sleeve with folding +30**, +40**,

-10**

Shrinkage, %, longitudinal / transversal, not less 50/35*;
45/30*;
40/30*
not less than 60% longitudinally,
not more than 25% transversally
40/30* 40/30*;
40/25*;
40/20*;
30/20*
Appearance of film The film should not have pressed-in creases, breakages, holes, except for artificial perforation holes, mechanical damages, colored stripes due to overheating of raw materials
Color Natural, dyed
Tensile strength, MPa, not less, in the following direction:
– longitudinally 14,7
– transversally 13,7
Relative elongation, %, not less, in the following direction:
– longitudinally (200-250)* 250
– transversally 300 350
Static coefficient of friction, not less 0,5
The smell and taste of water extracts, score, not higher 1
Formaldehyde concentration in water extract, mg/dm3, no more 0,1
Do not change the color and clarity of distilled water

*- values of parameters depend on the nominal film thickness;

**- values of parameters depend on the nominal film width;

Other nominal thicknesses of the film may be produced upon request.

 

Polyethylene Greenhouse film
(Technical Specifications TU BY 300041455.036)

Polyethylene greenhouse film is intended for agricultural applications for greenhouses covered with film.

Grade SS-3T heat retaining, light stabilized polyethylene film
TSP heat retaining, light stabilized polyethylene film that selectively transmits visible light
Grade TSS-5 light stabilized polyethylene film

Technical characteristics

Parameter Norm for the grades
SS-3Т TSP ТSS-5
Appearance The film should not have cracks, pressed-in creases, breaks and holes, punctures, metal inclusions
Nominal film thickness, mm 0,120; 0,150; 0,180 0,180; 0,200; 0,220
Maximum deviation from the nominal film thickness, mm ± 0,030
Film width, mm, within the range 1500 – 3000
Maximum deviation from width of the film, % ± 2,5
Tensile strength, MPa, not less:
longitudinally 15 15 16
transversally 15 15 16
Relative elongation, %, not less, in the following direction:
longitudinally 350 350 450
transversally 400 400 500
Color Pink Goldish
Gels, pieces per 1 m2, not more:

– size from  0,5 to 1,0 mm inclusive,

– size above 1,0 to 2,0 mm inclusive.

 

15

5

Angel hairs, pieces, per 1 m2, not more:

– sizefrom0,5 to 2,0 mm inclusive,

– size above 2,0 to 3,0 mm inclusive.

 

20

3

Foreign inclusions, pieces per 1 m2, not more: – size from 0,2 to 0,5 mm inclusive. 5

Polyethilene film Vilaterm
(Technical Specifications TU RB 300041455.029)

Polyethylene film Vilaterm is intended for agricultural applications such as foodstuff conservation, mulching and other use cases.

Technical characteristics

Parameter Norm
Appearance The film should not have passing-through cracks, pressed-in creases, breakages, holes, punctures, metal inclusions.
Nominal film thickness, mm 0,100 – 0,300
Maximum deviation from the nominal film thickness, % ± 30
Film width, mm, not less:

sleeve

fabric

 

500

1000

Maximum deviation from the nominal film width, mm

sleeve

fabric

 

 

± 50

± 100

Tensile strength longitudinally and transversally, MPa, not less 8,3
Note – Standards for film thickness, web width and sleeves are specified in contracts

Polyethilene household bags
(Technical Specifications TU BY 300042199.101)

Polyethylene household bags are produced as two types:

– Type A – is intended for placing, protection, transportation, loading and unloading, shipping and storage of food;

– Type B – is intended for placing, protection, transportation, loading and unloading, shipping and storage of various goods and bulk products of household and industrial use (excluding food).

The bags are for products with not more than 20 kg weight and temperature not more than 40 °С.

Type A bags are disposable.

Technical characteristics

Parameter Norm
Type А Type B
Appearance There should be no cracks, pressed creases, punctures, tears, rips, through holes, foreign inclusions (including metal)
Color Undyed Undyed, from light gray to black
Gels and angel hair Not allowed
Length, mm 1000 ± 20
Width, mm 500 ± 18
Nominal thickness, mm 0,080 ÷ 0,180
Deviation of actual thickness from nominal, % ± 30
Weld strength at break, MPa, not less 8,2
Distance from the baged get other seam, not less 15
Welding seam, appearance Evenly and properly welded seam without cracks, creases, burnt spots.
Welding seam tightness Tight

Polyethilene household pipes
(Technical Specifications TU RB 300041455.039)

Polyethyelene household pipes are intended for agricultural applications such as the manufacture of greenhouses, construction of drain sewage systems and other technical use cases.

Use of the pipes for drinking water pipelines is not allowed.

The pipes are produced as straight sections with 1,5-6 meters length or in coils with length not more than 300 meters.

Technical characteristics

Outer diameter, mm Wall thickness, mm
Nominal value Tolerance Nominal value Tolerance
18 ± 0,3 2,0 ± 0,4
2,5 ± 0,5
20 ± 0,3 2,0 ± 0,4
25 ± 0,3 2,0 ± 0,4
2,7 ± 0,5
3,5 ± 0,6
4,2 ± 0,7
32 ± 0,7 2,0 ± 0,4
2,4 ± 0,5
3,5 ± 0,6
4,2 ± 0,7
5,4 ± 0,9
40 ± 0,4 3,3 ± 0,5
50 ± 1,0 2,4 ± 0,5
2,7 ± 0,5
3,7 ± 0,6
4,2 ± 0,7
5,4 ± 0,9
8,4 ± 1,3
63 ± 1,1 3,0 ± 0,5
4,7 ± 0,8
6,8 ± 0,9
10,5 ± 1,6

 

 

PIGMENT SUPER CONCENTRATES

(Technical Specifications TU BY 300041455.020)

Pigment super concentrates are intended for dyeing polyolefins (LDPE, HDPE and etc.) in the extrusion process, and also for dyeing articles in the production by extrusion and molding, including products for food contact use and toys.

TECHNICAL CHARACTERISTICS

Parameter Norm
Pellet size in any direction, mm from 2 to 5
Mass fraction of pellets with size above 1 and up to 2 mm,%, not more 0,5
Mass fraction of pellets with size above 5 up to 8 mm, %, not more 5,0
Color Corresponds to the reference color sample
Thermal stability of dyeing at 200 °C Passes the test
Migration resistance of pigments Passes the test

 

POLYETHYLENE WAX

(Technical Specifications TU RB 300041455.024)

Polyethylene wax is intended for the production of wax compositions for industrial purposes in various branches of industry.

TECHNICAL CHARACTERISTICS

 

Parameter

Norm
Non-oxidized wax Oxidized wax
PV-200 PV-300 PVO-30
Appearance Particles of irregular shape with a size of 0,1-7 mm in different  directions from white to light yellow color Pieces of various sizes from light yellow to light brown color
Presence of pellets with a size over 7 to 12 mm,%, not more 0,25
Melt viscosity (dynamic) at 140°C, Pa•s 10-3 180-300 300-450 25-80
Dropping Point, °C Not less than 103 Not less than 104 Not more than 100
Penetrations, pcs (10-1 mm), not more 5,0 3,0 30,0
Mass fraction of ash, %, not more 0,02
Acid value, mg KOH per 1 g of wax 25,0 – 30,0
Saponification value, mg KOH per 1 g of wax 45,0 – 80,0
Number of inclusions, not more 30